FlexPAK 1000 DX

The leading extraction solution. Always the right capacity.

The FlexPAK DX high vacuum unit represents the foremost solution on the market. The unit is designed for the extraction of welding fumes, grinding dust, metal chips etc. FlexPAK DX is suitable for cleaning the workplace, the shop floor, and machines. FlexPAK DXregulates the speed of the motor automatically depending on the vacuum demand. Compared to traditional controllers, FlexPAK provides an optimal, and well-balanced vacuum according to the need, ensuring energy-saving operation. The filters are effectively cleaned by applying powerful air bursts to the filter through quick opening valves. The dust is knocked off by the impact and collected in the dust bin. The sequence is controlled by the PLC, and it can be adjusted to suit every installation. This maximizes the life of the filter and ensures the correct functioning of the unit. FlexPAK can be fitted with different types of alarms, for example, level monitors for waste containers, filter indicators (for clogged filters) and fire alarms. Alarms can be activated at A and B levels and can be set to give both visual and audible signals. FlexPAK800 DX is a high vacuum unit, suitable for applications where metal chips, shot blasting grit and other heavy material need to be removed. FlexPAK1000 DX operates at a lower vacuum level and is suitable for extracting welding fumes and grinding dust and for use where a constant airflow, independent of the number of users, is a requirement. FlexPAK DX is designed to extract combustible and noncombustible dust, but the unit “as a whole” is not to be placed in an area that is classified as a zone according to directive 1999/92/EC. It is only the inside of the filter that meets the ATEX requirements. FlexPAK 800/1000 DX may be used with duct systems internally classified as zone 20, 21 or 22. The product has no marking since there is no internal ignition source. The inside is to be considered as a simple filter/ silo and does not fall under the scope of the directive 94/9/ EC. It is of outmost importance to know the properties of the extracted material. The FlexPAK DX is intended to be a part of an extraction system collecting material with the following properties:
• Dust explosion class: St1 and St2
• Pmax: ≤10 bar
• MIE (Minimum Ignition Energy) > 3 mJ
• MIT (Minimum Ignition Temperature) > 205 ºC
Materials with properties not given within the above stated values must be investigated prior to use with the FlexPAK DX. Contact Nederman for technical support and Dust application investigation.
Built in PLC functions:
• Pipe flushing and filter cleaning sequences are performed just before system idling.
• Weekly timer – ensures unit is switched off outside normal working hours.
• Overtime timer (option).
• Waste emptying possibilities: Manual, automatic time controlled emptying, or by an optional Bin Level Indicator.
• Filter cleaning possibilities: automatic time controlled cleaning, automatic cleaning triggered by a delta pressure sensor.
Built in safety functions:
• Filter cleaning is disabled during waste emptying sequence.
• Built in Emergency stop switch.
• Monitored control filter to detect main filter failure.
• Monitored relief panel. Vents the explosion to a safe area and stops the unit.

  • Easy to install
  • Built in PLC functions
  • Low running and maintenance costs
  • Built in safety functions
  • Suitable for a wide range of applications

Technical data
, , , ,
,
without
Acc. To Class M
50
20
1
70
3
Power (kW) 18,5
400
Weight (kg) 412,5
15
FlexPak 1000 DX 50Hz, 400V

ArtNo: 40050321

Accessories for this product 11

Firealarm filters compl.
ArtNo: 40116540

Firealarm filters compl. The Fire alarm is activated when the temperature exceeds +140 Deg. C. It can stop the vacuum unit if wired to the Nederman High Vacuum Starter. Can be used as a trigger warnings such as external fire alarm, If installed whitin EX zone, intrinsic safe circuit must be used. Voltage: 24V AC/DC.

Grating spiro 160mm
ArtNo: 40130230

Grating spiro 160mm

Bend spiro BU 160mm 90dgr
ArtNo: 40130810

Bend spiro BU 160mm 90dgr

Silencer LT160
ArtNo: 40139090

Silencer LT160

Flanged pipe Ø 150, 1 m
ArtNo: 40375263

Flanged pipe Ø 150, 1 m

Flanged bend 90º Ø 150
ArtNo: 40375264

Flanged bend 90º Ø 150

BLI EX
ArtNo: 40375269

BLI EX

Diff.pressure switch 3-15 kPa NC
ArtNo: 40375273

Diff.pressure switch 3-15 kPa NC

Flanged pipe d150, 0,5m
ArtNo: 40376525

Flanged pipe d150, 0,5m

Flanged bend 45º Ø 150
ArtNo: 40376770

Flanged bend 45º Ø 150

Deflector 220x540
ArtNo: 40376771

Deflector for relief panel 220x540