600A EX

A Powerfull stationary dustcollector

A Powerfull stationary dustcollector, excellent high vacuum for suction over long horizontal and vertical distance.

You can choose a dustcollector with bigbagholder and counterweight discharge valve or a dustcollector with a manual discharge valve. Equipped with efficient and selfcleaning bag filters.

600A EX is category 2GD equipment according to directive 2014/34/EU. This means that it may be placed in areas classified as zone 21 or 1 according to directive 1999/92/EC. However, 600A EX may not be used to vacuum combustible material; they are only for use with non-combustible dusts. This is since they lack a protection system to limit the effects of an internal explosion, hince the X in ATEX marking.

ATEX approved euqipment: II 2GD c IIB 60°C (T6) X

  • A Powerfull stationary dustcollector, excellent high vacuum for suction over long horizontal and vertical distance. You can choose a dustcollector with bigbagholder and counterweight discharge valve or a dustcollector with a manual discharge valve. Equipped with efficient and selfcleaning bag filters. 600A EX is category 2GD equipment according to directive 2014/34/EU. This means that it may be placed in areas classified as zone 21 or 1 according to directive 1999/92/EC. However, 600A EX may not be used to vacuum combustible material; they are only for use with non-combustible dusts. This is since they lack a protection system to limit the effects of an internal explosion, hince the X in ATEX marking. ATEX approved euqipment: II 2GD c IIB 60°C (T6) X
  • Very powerful and reliable ejector as vacuum producer
  • Very powerful and reliable ejector as vacuum producer
  • Legs with two height options

Technical data
Certifications CE, EX
Installation Indoor
Filter cleaning method Compressed air
Application Dust, Granulate, Grit, Swarf
Dustbin volume (l) 146
Filter Area (m²) 2,5
Filter type Bag
Filter material Antistatic Polyester
Compressed air requirement 5,3 Nm3/min
Max airflow (m³/h) 318
Noise level (dB(A)) 75
Max vaccum (kPa) -78
Inlet 76 mm (reducer to ø 51 mm included)
Weight (kg) 240
Hose length (m) 10
Hose diameter (mm) 51
Note ATEX - EX II 2 GD c IIB 60°C(T6) (Not for combustible dust)

Accessories for this product 9

Abr plate for silo S200, inside 210x643 (R280)
ArtNo: 43627001

Abr plate f/silo S200

Hose PU12 Ø 51 L=10m w. couplers
ArtNo: 43832200

Hose PU12-51 L=10m w. couplers

Floor nozzle, width 400 mm with large rubber wheels
ArtNo: 43840250

Floor suct headd51/400/65

Elbow pipe, Ø51 mm
ArtNo: 43842150

Suct pipe bend d51 antist

Bulk nozzle Length 910 mm
ArtNo: 43850001

Gulper head d51

Scraper nozzle, length: 500 mm
ArtNo: 43851050

Scraping tool d51 l500

Hand nozzle, soft brush Ø90 mm
ArtNo: 43860200

Hand suct h soft brushd51

Cone nozzle Length 250 mm
ArtNo: 43862001

Conical nozzle d51

Reducer conical d76-51, Acid stainless steel
ArtNo: 43880300

Red conical d76-51