BenchTop Extraction Arm FX2 50 ESD/EX

The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required.

Nederman FX2 arms are made of lightweight anodized aluminium sections, with two or three adjustable, composite friction joints. Offering strength and durability combined with easy handling, they can be used in many types of environment. They are especially suitable for applications where small, flexible and easy-to-use arms are required.
The arm is designed for use in electronic environments where there is a risk of electrostatic discharges. The ESD/EX can also be used for certain applications in potentially explosive atmospheres. Recommended for use in zone 1, 2 and 21, 22.

  • Optimal efficiency and low noise provides safe and quiet working environment
  • Ceilings, walls and floors or fixed to worktops mountings and cut2fit extension profile gives maximum installation flexibility
  • The two outermost arm joints can rotate and swivel through 360°, which gives the unique maneuverability
  • The lean, smooth and aesthetic design allows arms to fit in well in any environment without compromising its durability and reliability
  • Highly integrated products that save customers’ time and costs, as well as providing the reliability and functionality to deliver a better performance

Technical data
Certifications ESD, CE, EX
Noise level (dB(A)) 60 dB(A) at 65 cfm
Installation Indoor
Material Tubes in anodized aluminium. Joints in conductive PP plastic. Duct connector in conductive EPDM rubber. Minihood in conductive PP plastic.
Fume temperature max 70°C
Extraction arm diameter (in) 2 in.
Airflow (CFM) 30 cfm - 65 cfm
Colour Aluminum and black

Accessories for this product 18

FX-Cut2fit extension-L2200
ArtNo: 70374600

FX-Cut2fit extension-L2200.

FX-Dome hood-ESD/EX-D50/75/100
ArtNo: 70376983

FX-Dome hood-ESD/EX-D50/75/100

FX2-Duct connector-ESD/EX-D50
ArtNo: 70377037

FX2-Duct connector-ESD/EX-D50

FFX2-Bracket kit-D50/75/100-L500
ArtNo: 70377042

FX2-Bracket kit-D50/75/100-L500. Complete mounting kit, with the classic bracket, 500mm (19.68 inch) extension profile and associated parts, for mounting FFX2 50/75/100 arms on the ceiling.

FX2-Wall BRKT kit-Flat-L190-Black.
ArtNo: 70377044

FX2-Wall BRKT kit-Flat-L190-Black

FX2-Ceiling cover plate-PLUS
ArtNo: 70377045

FX2-Ceiling cover plate-PLUS,

FX2-Al duct-L1000-D50toD77
ArtNo: 70377056

FX2-Al duct-L1000-D50toD77. Aluminum duct with 77 mm ( 3 inch) diameter and 1000 mm (39.37 inch) length is designed to replace vertical ventilation duct above the swivel of FX2 50 arm. This is a good looking alternative to standard, ventilation duct.

FX2-Al duct-L2000-D50toD77
ArtNo: 70377057

FX2-Al duct-L2000-D50toD77. Aluminum duct with 77 mm (3 inch) diameter and 2000 mm (78.74 inch) length is designed to replace vertical ventilation duct above the swivel of FX2 50 arm. This is a good looking alternative to standard, ventilation duct.

FX2-Hose support ring-D75
ArtNo: 70377067

FX2-Hose support ring-D75. Place into the 75 mm (3 inch) hose to support the connection between the hose and the duct connector of the arm.

FX-Hose-ESD-D75-L3000-Black
ArtNo: 70377101

FX-Hose-ESD-D75-L3000-Black

FX-Combi hood-ESD/EX-D50/75/100
ArtNo: 70500244

FX-Dome hood-ORIGINAL-D50/75/100

FX-Metal hood-ESD/EX-D50/75/100
ArtNo: 70500544

FX-Metal hood-ESD/EX-D50/75/100

FX-Bracket kit-D50/75/100-L190
ArtNo: 70501144

FX-Bracket kit-D50/75/100-L190

FX-Classic bracket-D50/75/100
ArtNo: 70501244

FX-Classic bracket-D50/75/100

FX-Cut2fit extension-L1100.
ArtNo: 70501344

FX-Cut2fit extension-L1100

FX2-Bench bracket kit-D50/75/100
ArtNo: 70501444

FX2-Bench bracket kit-D50/75/100

FX-Ceiling cover plate
ArtNo: 70502644

FX-Ceiling cover plate

FX-Flange hood-ESD/EX-D50/75/100
ArtNo: 70502944

FX-Flange hood-ESD/EX-D50/75/100