BenchTop Extraction Arm FX2 50 Original

The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required.

Nederman FX2 arms are made of lightweight anodized aluminium sections, with two or three adjustable, composite friction joints. Offering strength and durability combined with easy handling, they can be used in many types of environment. They are especially suitable for applications where small, flexible and easy-to-use arms are required.
A robust and reliable all-round arm for general applications where there is little risk of electrical discharges or attack by aggressive chemicals.

  • Optimal efficiency and low noise provides safe and quiet working environment
  • Ceilings, walls and floors or fixed to worktops mountings and cut2fit extension profile gives maximum installation flexibility
  • The two outermost arm joints can rotate and swivel through 360°, which gives the unique maneuverability
  • The lean, smooth and aesthetic design allows arms to fit in well in any environment without compromising its durability and reliability
  • Highly integrated products that save customers’ time and costs, as well as providing the reliability and functionality to deliver a better performance

Teknisk data
Luftstrøm (m3/t) 50 - 110
Sertifiseringer CE
Ekstraheringsarm, diameter (mm) 50
Damptemperatur max 70°C
Installasjon Innendørs
Materiale Rør i eloksert aluminium. Leddene i PP plast Bend i EPDM gummi Minihette i PP plast
Støynivå (dB(A)) 60 dB(A) at 110 m3/h

Tilbehør til dette produktet 20

FX-Cut2fit extension-L2200.
ArtNo: 70374600

FX-Cut2fit extension-L2200. Cut2fit forlengelse kan bli kuttet til enhver lengde og bør monteres sammen med den klassiske braketten for montering av FX2 50/75/100 armene på tak eller vegg.

FX-Dome hette-ORIGINAL-D50 / 75/100.
ArtNo: 70376982

FX-Dome hette-ORIGINAL-D50 / 75/100. Transparant kuppel hette, laget av PET-G, for FX2 50/75/100. Armene er utformet for å fange høy spredning av forurensninger. Ergonomisk håndtak på begge sider av hetten gjør det lettere å manøvrere.

FX2-Duct connector-ORIG/CHEM-D50
ArtNo: 70377036

FX2-Duct connector-ORIG/CHEM-D50. Grey duct connector to ease the coupling of 77 mm Alu duct to external 80 mm ductwork. Please note all arms are already supplied with a duct connector as standard.

FX2-Duct connector-ORIG/CHEM-D75
ArtNo: 70377038

FX2-Duct connector-ORIG/CHEM-D75

FX2-Brakettsett-D50/75/100-L500
ArtNo: 70377042

FX2-Brakettsett-D50/75/100-L500. Komplett monteringssett med den klassiske braketten, 500 mm forlengerprofil og tilhørende deler, for montering av FFX2 50/75/100-armer i taket.

FX2-Wall BRKT kit-Flat-L190-White
ArtNo: 70377043

FX2-Wall BRKT kit-Flat-L190-White. Complete mounting kit, with flat wall bracket,190 mm (7.48 inch) extension profile and associated parts, for mounting FX2 50/75/100 arms with 250mm from the vertical centre line of the arm to the wall.

FX2-Tak dekkplate-PLUS
ArtNo: 70377045

FX2-Tak dekkplate-PLUS. Dekker gjennomføring for både kanal og forlengelsesprofil i himlingsplater e.l.

FX2-Wall-P BRKT kit-D50/75/100-L190
ArtNo: 70377046

FX2-Wall-P BRKT kit-D50/75/100-L190. Complete mounting kit for mounting FX2 50/75/100 plus arms with 250 mm (9.84 inch) from the vertical centre line of the arm to the wall.

FX2-Al duct-L1000-D50 to D77
ArtNo: 70377056

FX2-Al duct-L1000-D50 to D77. Aluminum duct with 77 mm ( 3 inch) diameter and 1000 mm (39.37 inch) length is designed to replace vertical ventilation duct above the swivel of FX2 50 arm. This is a good looking alternative to standard, ventilation duct.

FX2-Al duct-L2000-D50 to D77
ArtNo: 70377057

FX2-Al duct-L2000-D50 to D77. Aluminum duct with 77 mm (3 inch) diameter and 2000 mm (78.74 inch) length is designed to replace vertical ventilation duct above the swivel of FX2 50 arm. This is a good looking alternative to standard, ventilation duct.

FX2-Hose support ring-D75
ArtNo: 70377067

FX2-Hose support ring-D75. Place into the 75 mm (3 inch) hose to support the connection between the hose and the duct connector of the arm.

FX-Hose-D75-L3000-Grey
ArtNo: 70377098

FX-Hose-D75-L3000-Grey Flexible hose in grey PVC with 75 mm (3 inch) diameter and 3000 mm (118.11 inch) length. It shall be used with hose support ring to connect hose to arm.

FX-Combi hette-ORIGINAL-D50 / 75/100
ArtNo: 70500144

FX-Combi hette-ORIGINAL-D50 / 75/100. Transparent kombi hette, laget av PET-G, for FX2 50/75/100. Armene er utformet for å fange opp forurensninger med lav energi. Ergonomisk håndtak på begge sider av hetten gjør det lettere å manøvrere.

FX-Metal hette-ORIG / CHEM-D50 / 75/100
ArtNo: 70500444

FX-Metal hette-ORIG / CHEM-D50 / 75/100. Pulverlakkert hvit metall hette, laget av alumium, er designet for å fange forurensinger i høy temprature, aggressiv ryke hvor korrosjonsbeskyttelse må sikres eller støv splatter.