Nederman FX2 arms offer unbeatable flexibility in combination with optimal efficiency and can be used in every type of environment. Multiple mounting options are available and the arms can be easily integrated with a complete Nederman filtration system.

Nederman FX2 extraction arms are especially suitable for applications where small, flexible and easy-to-use arms are required to eliminate smoke fumes, gases, dust, and particles. They capture the pollutants as close to the source as possible, so that a high capture rate is achieved with minimum energy use. Any hazardous airborne substances are removed before they reach the breathing zone or contaminate premises and goods. 

Nederman’s FX2 arms are available in three different models to cover a wide spectrum of needs. Common application areas are, for example: laboratories, electronics industry, 3D printing, health service and pharmacies, gluing stations, museums and hair and nail salons. 

Nederman FX2 in short

  • Effective fume and dust extraction
  • Low noise level and high energy efficiency
  • Stable positioning with easy maneuverability
  • Wide range available
  • Aesthetic design
  • Complete freedom when planning installation
  • Maximum installation flexibility

Unique maneuverability
Nederman FX2 arms are highly flexible, and simple to position, extend and retract. The two outermost arm joints can rotate 360°. This makes it possible to position the hood exactly where required. Once correctly positioned, the hood can be locked in place using two friction devices in the arm joints.

Optimal efficiency and low noise
The FX2 arms were developed using computerized simulations, and the resulting highly improved airflows mean    that smaller fans that consume less energy are required. Another user benefit is the reduced noise level.  Depending on the airflow, this means a reduction of about 5 dB or more, when compared with similar arms on the market. Complementary Nederman products such as fans, ducting and control units can further increase energy efficiency.

Aesthetic design
The lean, smooth and aesthetic design allows Nederman FX2 arms to fit well in any environment without compromising durability and reliability. The swivel design is optimized to ensure a slim profile and clear sight. Thanks to the long upper arm section, the FX2 PLUS swivel and accessories can be placed high up or above a false ceiling. It creates a modern design that easily blends in and prevents dust accumulation.

3 Models of Arms to suit your application

Original

General applications where there is little risk of electrical discharges or corrosive contaminants

Chemical

Applications for corrosive contaminants

ESD

Applications where static electricity and sparks must be avoided

Did you know?

A sideways-positioned hood close to the bench gives you the best capture efficiency

Contact us

We have extensive experience of various challenges in the different industries and our experts are very skilled, helpful and professional. With us, you can feel secure that we take care of you and your needs. You are always welcome to contact us regardless if you have a short question or a more complex and complicated one. A warm welcome to Nederman.

Contact us here