High Vacuum Valves, TAV 50

Maximize the efficiency of your high vacuum system with automatic valve

The TAV 50 automatic valves maximize the efficiency of your high vacuum system. Because the valves can be opened and closed automatically, the vacuum is always concentrated on the connections, extraction points or machines in operation at the time. This maximizes the power of extraction, produces lower operating costs and minimizes the size of the vacuum unit.

Description of ATEX versions
Depending on the variant and the application area, many of the TAV 50 units are marked according to the ATEX Directive with the EX symbol and equipment category. All TAV 50 variants with the EX symbol are category 3D equipment according to Directive 2014/34/EC. That means that these variants can be placed in zone 22 pursuant to Directive 1999/92/EC. The manually controlled TAV 50 MA is suitable for installation within the classified area (zone 22) even though it is not marked with the EX symbol. Manually controlled equipment does not fall under Directive 2014/34/EC (ATEX), so this valve is not marked with the EX symbol. Other valves without the EX symbol (W, G and AC/DC valves) are not suitable for ATEX and so should not be installed within the classified area. See table of part numbers below, where EX is included in the name, to see which are suitable for the classified area.the EX symbol.

• Lower operating costs and smaller vacuum equipment
• Lower noise level on the premises
• Conductive plastic material