Automatically cleaned for light to medium welding fumes and for applications like sticky and hygroscopic non-combustible dust
FilterBox 10A ePTFE is equipped with advance ePTFE filter technology that provides higher efficiency and more effective cleaning, extended filter life and reducing the cost of ownership. FilterBox 10A ePFTE has a N24 fan for a maximum air flow capacity of 1 000 m3/h (600 CFM). The ePTFE media technology utilized in the 13m2 (140ft2) cartridge is ideal for demanding dust or fume applications. An integrated silencer reduces noise from the fan and outlet air. additional protection from harmful particles is provided if a HEPA filter is installed (optional).
The unit has an advanced filter control system indicating the pressure drop with a series of LED's as well as on the LCD display. When the air flow is too low an audial alarm precedes the automatic, motorized cleaning sequence.
Note! FilterBox is not for use in environments where combustible dust or gases are present, and it is not for use in filtering combustible dust or gases.
-
Automatically operated, mechanical and pneumatic filter cleaning for long filter life.
-
LCD panel with operating status and menu system for parameter setup and settings. Integrated LED light with switch for fan and light on the hood.
-
Possibility to connect a pneumatic tool, electric 1-ph. tool or welding sensor clamp to automatically start the fan.
-
Automatic damper preventing dust from leaking out while cleaning. Dust free filter replacement and emptying of dust bin.
-
Filter efficiency E11 (EN1822), MERV 16 (ASHRAE 52.2, 2017). Approved for welding fumes category W3 according to ISO 219 04-1, third party tested.