- Home
- Products
- Mobile dust and fume extractors
- FilterBox
FilterBox 12A
FilterBox 12A
Automatically cleaned for medium to heavier welding fumes & dust applications
Filter efficiency M6 (EN779), MERV 11 (ASHRAE 52.2, 2017). Approved for welding fumes category W3 according to EN 15012-1, third party tested.
Automatically operated, mechanical and pneumatic filter cleaning for long filter life.
LCD panel with operating status and menu system for parameter setup and settings.
Possibility to connect a welding sensor clamp to automatically start the fan.
Automatic damper preventing dust from leaking out while cleaning. Dust free filter replacement and emptying of dust bin.
The FilterBox 12A is equipped with a powerful fan, N29n for a maximum air flow capacity of 1 200 m3/h (700 CFM) and is ideal for medium frequency dust or fume applications.
The unit has an advanced filter control system with automatic cleaning that starts when the air flow is too low. Depending on the model, it is equipped with mechanical cleaning for dust applications or a combination of mechanical and compressed air cleaning for fumes and dust.
FilterBox 12A is available either as a mobile unit on wheels or attached to a floor stand. Additional protection from harmful particles is provided if a HEPA filter is installed.
For dust applications, the unit is cleaned mechanically. For welding fumes it uses a combination of mechanical and compressed air cleaning.
For welding applications, compressed air cleaning is required.
Filterbox 12A is suitable for welding applications such as MMA (Stick Welding) (excluding high alloy), as well as for grinding.
Note! FilterBox is not for use in environments where combustible dust or gases are present, and it is not for use in filtering combustible dust or gases.
Loading...
| Filter efficiency (%) | 99 |
| Installation | Indoor |
| Certifications | CE |
| Airflow (m³/h) | 1200 |
| Dustbin volume (l) | 15 |
| Extraction arm diameter (mm) | 160 |
| Filter Area (m²) | 13 |
| Noise level (dB(A)) | 74 |
| Compressed air requirement | DIN ISO 8573-1, class 5/5/4 (7 bar) |
| Material | Casing in rotomoulded plastic |
| Protection class | IP 54 |