Nederman Extraction Arms Standard are specially designed for working environments with fumes, vapours or non explosive dust, where the demands for higher airflows and temperatures are moderate. Typical workplaces can be welding schools or applications in light production.

A wide range of compact and easy-to-use fans, designed for use with Nederman extraction products.


For light industrial usage suitable for electrical tools. Cable length 12m (39 ft.).

Industrial Vacuum Cleaners to be used for collection, extraction and separation of dust, particles, granulates and liquids in many different applications and demanding environments, designed for reliability and efficiency. Being combustible dust experts, Nederman has a range of ATEX-approved vacuum cleaners for use in potentially explosive atmosphere - to be found under the category Industrial Vacuum Cleaners EX.

Explosion pressure resistance equipment designed to prevent a transmission of dangerous effects of explosion pressure wave and flames front to upstream areas.

Ideal solution for removing dust and fumes in all types of industries. Typical areas of applications can be found in welding shops, car body shops, construction industries, bakeries, industrial laundries, etc. The L-PAK is also perfect for cleaning of the workplace and the workshop floor.

FibreDrain® oil mist and oil smoke collectors are designed with the unique FibreDrain® filter technology to guarantee high filtration efficiency and long filter life also at high oil mist concentrations in continuous operation. The FibreDrain® oil mist collectors are modular which extends the possible air flow capacity over the maximum size in standard range. All units are prepared with sampling ports that can be used for Nederman Insight solutions, other control systems or measurements during operation. A wide range of accessories available to meet most application requirements. All standard units incorporate fans in compliance with ErP 2015 directive.

Exhaust extraction of vehicle diesel fumes. The best solution in workshops with a high ceiling, where overhead cranes etc. have to be considered, or where high vehicles must pass.

MCP SmartFilter is a multi-purpose filtration system. It is customizable to perfectly fit customer specific demands with airflow up to 28 000 m3/h. Suitable for smoke, fumes, dust and combustible dust and can be used in several different applications such as welding, metal cutting and general dust.

Safe, effective, and flexible solutions that capture weld fumes and dust directly at the source — easy to position wherever extraction is needed.

When mobility, flexibility and a compact footprint is key, a mobile solution is often the best way to avoid contaminant exposure. Nederman FilterBox range for welding fumes and non- combustible dust are easy to move around your factory to wherever the extraction is needed. The wide product range makes it easy to find a model with the capacity, features and filter type needed.  Accessories are available to improve individual applications. Can be combined to work as a mobile unit or as a fixed mounted unit.

QF (Quick Fit) duct for process ventilation systems.

Mobile filter unit for light welding and extraction applications. The FilterCart Original extraction arm includes an integrated spotlight, which optimizes the user-friendly design.

Easy to handle vehicle exhaust extraction on rail for all types of workshops. Very high extraction efficiency. One extraction unit can serve several work bays.

Comprehensive range of industrial dust and fume collectors that deliver complete and effective clean air solutions suitable for all industries.

The wide range of medium sized fans for fume extraction and filtering as well as for vehicle exhaust extraction.

Explosion Isolation Flap Valve B-Flap I - protective system.

The Original extraction arm is the perfect solution for extracting welding smoke, fumes and dust in workshops.

For light industrial usage suitable for electrical tools. Cable length 17m (55 ft.).

Industrial Vacuum Cleaners to be used for collection, extraction and separation of dust, particles, granulates and liquids in many different applications and demanding environments, designed for reliability and efficiency. Being combustible dust experts, Nederman has a range of ATEX-approved vacuum cleaners for use in potentially explosive atmosphere.

LBR SmartFilter is a reverse air style baghouse suitable for industrial dust collection applications including the wood industry (furniture, cabinetry, windows, doors, flooring, particle board, MDF, building materials, marine, sawmills), agriculture (seed transportation and cleaning), waste / recycling, paper, plastic and other bulk materials. LBR SmartFilters are IIoT ready, energy efficient solutions designed for continuous duty operation for air volumes up to 500 000 m3/h (300,000 ft3/min) and available in both overpressure (positive) or vacuum (negative) fan arrangements. Four base product models are available each with different dust handling systems that are selected based upon the amount and material being collected. Each model is modular and configurable for unique customer requirements and meets all applicable ATEX and NFPA combustible dust requirements. With over 35,000 installations globally and over 75+ years of experience, the LBR is a proven solution from a brand you can trust.

Versatile, self-contained unit for extraction and filtration of welding fume (including on-torch), grinding dust, composite- or other combustible dust as well as extraction or cleaning in all types of industries.

Emulsion mist collectors for low to medium concentration applications in one-shift operations.
Compact design and low air flow makes the units suitable for installation close to or on top of the machine tool.

Bag dust collector for woodworking applications.

For extraction of welding fume, grinding dust, metal turnings, composite materials, dust and particles but also as a central extraction unit for cleaning systems for workplaces and machines.

The Fume Eliminator is designed to be carried to the working area. Connected to a welding torch or to an extraction nozzle, the Fume Eliminator unit extracts the fume directly at source.

Extension arms, exhaust hoses and other accessories for vehicle exhaust extraction.

Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.

Low voltage cable reel for light industrial and workshop usage. Cable length 50 m (164 ft.).

Versatile high-vacuum systems for industrial housekeeping and processes requiring safe and effective source capture of dust, fumes and heavy materials.

Manual and automatic capable vacuum valves designed for use with Nederman central and compact industrial vacuum systems.

NEX MD welding fume extraction arms are the top of the range arms when it comes to high airflows and extraction at high temperatures. 
The weld fume extractor are specially designed for working environments with very heavy smoke, vapours or non explosive dust.

QF sealed ducting offers a complete range of diameters and accessories for easy-to-fix professional installations.
Manufactured from galvanised steel with laser welded seams, which have smoother internal surfaces and provide greatly enhanced leak resistance.

Exhaust extraction for vehicles in motion with vertical stack exhaust pipes

Suitable for dust, welding fume, and debris. 2-stage filtration and fully automatic filter cleaning. Central inlet with velocity reducer.

Robust cable reel for heavy industrial usage. Available in 1-phase and 3-phase versions  and supplied with thermal overload protector.

Industrial vacuum cleaning accessories including floor nozzles, wands and a variety of nozzle types for a wide range of applications.

The Combifab range of highly efficient, quiet running radial fans include designs for handling clean air, air containing dust and waste material, and for transporting high concentrations wood dust and chips.

High-performance extraction arms and local exhaust hoods for industrial and commercial use - easy to move, hold position reliably, and effectively capture dust, fumes, and smoke.

Compact cartridge filter for decentralized indoor air cleaning, where air recovery is possible.

Fume and dust extractor for heavy duty welding and where high airflows are demanded.
The NEX HD welding fume and dust extraction arm is top-of-the-line for high airflows and extraction of fume and dust at higher temperatures.

Vehicle exhaust extraction systems designed for vehicles in motion such as fire trucks or ambulances.

FlexFilter 13/18 is a high vacuum cartridge filter for use in applications where there is a high content of dry dust particles.

LCP SmartFilter is a multi-purpose filtration system. It is customizable to perfectly fit customer specific demands with airflow up to 100 000 m3/h. Suitable for smoke, fumes, dust and combustible dust and can be used in several different applications such as welding, metal fabrication and general dust.

FB duct (Flat Edge, also known as Single Edged or Lipped Edge).

Rotary valves for transportation of material between two separate systems. In pneumatic conveying systems discharge is usually required from the filter or cyclone to the silo, at atmospheric pressure. This is an ideal application for the NRS type rotary valve.

Dust extraction arm for industries where hygiene is a top priority. Fulfills the requirements for use in environments containing combustible dust.

High-efficiency oil mist and smoke collectors for 24/7 industrial operation, ensuring clean factories, superior filtration, and long filter life.

The data cable reel D20 has been designed to withstand heavy usage in environments such as vehicle workshops, hardware labs, data centers, among others.

Ducting type FB in Mild Steel, excellent for industrial ventilation, vacuum and pneumatic conveying.

For light and heavy industrial usage. Especially suitable for vehicle repair shops, garages and maintenance workshops.

Acid-proof stainless steel arm and hood. Fulfills all requirements for use in environments containing combustible dust and gas, and very high hygienic demands.

Automation and digital monitoring solutions for industrial filtration systems, helping manufacturers improve energy efficiency and productivity.

Extraction system for emergency stations using a nozzle expanded by compressed air. Configurable as a track or rail to meet your station’s exact capacity needs.

Additive dosing equipment for adding of pre-coats such as hydrated lime into filter systems ensures stable functioning and prevents clogging of the filtered materials.

Compact reverse jet tubular cartridge filters.

Auto-M Filters are mechanically cleaned bag dust collectors suitable for non-continuous duty for industrial, commercial and educational locations.

For heavy and extreme industrial usage. Models from non to highly corrosive environment. Adjustable outlet position. For shorter distribution hose needs.

Designed for working environments with fumes, vapors or non-explosive dust, where the space is limited. The arm is flexible in all directions and simple to position and extend.

Industrial vacuum cleaners for safe, efficient collection of dry, wet, or liquid materials - including hazardous and combustible dust in demanding environments.

Reliable and functional solution for all types of stationary vehicles. Available with balancer or a cord for manual hose suspension.

Pre-separators designed for use with Nederman industrial vacuum system to separate larger particulates increasing filter life.

Automatic damper and operations box for on hood fan control and automatic fan start capability.

Solves the need of cleaning the air from airborne contaminants (i.e. dust, fumes, aerosols) and smells across a broad range of industrial or commercial applications.

Industrial vacuum extraction arms supporting vacuum hose.

High temperature resistant rubber and metal vehicle exhaust extraction nozzles to accommodate various types of vehicles and systems including European standard EURO 6 engines.

For heavy and extreme industrial usage. Models from non to highly corrosive environment. Adjustable outlet position. For longer distribution hose needs.

Vehicle exhaust extraction systems for safe, effective removal of fumes from cars, trucks, and other vehicles in workshops, service stations, and emergency facilities.

Industrial vacuum nozzles and on-tool manifolds options for high vacuum applications.

Durable industrial hose reels and cable reels, ensuring safe and efficient handling for electricity, compressed air, gas, data and fluids.

MEP SmartFilter is a multi-purpose filtration system. It is customizable to perfectly fit customer specific demands with airflow up to 10.500 m3/h. Suitable for all type of dry dust and combustible dust and can be used in several different applications such metal grinding, metal cutting, shot blasting and general dust.

Arms for extraction of fumes and capturing of odors when for example gluing or working with solvents. A flexible, cost-efficient and convenient solution for creating a fume-free workplace in for example laboratories and electronics industries.

Balancer keeps the tool or hose lifted at all times. An integrated centrifugal brake prevents the balancer from recoiling too quickly, which minimizes the risk of personal injury and material damage.

Sturdy hose reel for heavy and extreme industrial usage. Strong, durable and highly corrosion resistant.

Industrial high-vacuum fans for efficient collection of dust, chips, and heavy materials - ideal for manufacturing, cleaning, and extraction systems.

Protection curtains are easily movable for welding, grinding, turning, milling etc., and are ideal for the screening off temporary or permanent work places.

Kits for extraction of fumes and capturing of odors when for example gluing or working with solvents. A quick and convenient solution for creating a fume-free workplace in for example laboratories and electronics industries.

Bag dust collectors designed for continuous operation in process and general dust extraction applications with free flowing dust.

For heavy and extreme industrial usage when corrosive, acid resistance and ATEX certification is required. Ideal for food processing industries.

Reverse jet tubular bag dust collectors for many applications that generate light to heavy volumes of any dust.

Welding reel designed to handle oxygen and acetylene. For welding and heavy industrial usage.

Industrial blowers and general purpose fans for extraction and airflow management - efficient, durable solutions for dust, fumes, and exhaust.

Lubrication equipment for removal and handling of oil, liquids and greases. The product range includes dispensers, oil pumps, waste oil rails, service towers and fluid monitoring systems.

The SiloSafe is a compact reverse jet tubular cartridge dust collector, available as a venting filter or with an integral fan, was developed specifically for silo and bin venting applications.

Suction hoses and couplers for stationary filters.

Industrial ducts and pipes for standard and high-vacuum systems - quick-fit, durable solutions for ventilation, extraction, and efficient airflow.

ATEX approved vacuum hose reel suitable for cleaning combustible dust. Suitable when long and heavy vacuum hoses are needed. Provides tidy and safe storage when not in use.

Designed for free hanging applications to control light airborne dust/smoke in a contaminated air stream.

Suction hoses and high vacuum accessories such as ejectors, containers and power heads.

For light industrial usage. Air and water. Suitable for pneumatic tools, staplers, blow and water guns. For longer distribution hose needs.

Material handling systems including chain conveyors, silos, and truck loaders - efficient, durable solutions for wood dust collection and bulk material transport.


Comprehensive range of accessories covering all needs across our solutions for industrial air filtration. 


The FMC cartridge filter is ideal for removal of fine dusts and fumes that can be irritating and harmful.  It has a compact design and slide out filter removal system for easy maintenance..

QF Double Branch