BenchTop Extraction Arm FX2 50 ESD/EX
Brazo de aspiración eficaz, silencioso y flexible: diseñado para entornos electrónicos con riesgo de descargas electrostáticas.
Nederman FX2 arms are made of lightweight anodized aluminium sections, with two or three adjustable, composite friction joints. Offering strength and durability combined with easy handling, they can be used in many types of environment. They are especially suitable for applications where small, flexible and easy-to-use arms are required.The arm is designed for use in electronic environments where there is a risk of electrostatic discharges. The ESD/EX can also be used for certain applications in potentially explosive atmospheres. Recommended for use in zone 1, 2 and 21, 22.
-
Efficiently optimises the capture zone and removes contaminants at the source
-
Low noise levels for a safe and quiet workspace
-
Various lengths and mounting options for flexibility
-
Adjustable height for ergonomic efficiency
-
Adapts to business needs for optimal workspace
| Certificaciones |
ESD, CE, EX |
| Nivel de ruido (dB(A)) |
60 dB(A) at 110 m3/h |
| Instalación |
Interior |
| Material |
Tubes in anodized aluminium.
Joints in conductive PP plastic.
Duct connector in conductive EPDM rubber.
Minihood in conductive PP plastic. |
| Fume temperature |
max 158 °F (70 °C) |
| Extraction arm diameter (mm) |
50 |
| Airflow (m³/h) |
50 - 110 |
| Category type |
ESD |
| Colour |
Aluminum and black |
FX2-ESD/EX-D50-L700-Up/Dow-Through
Ventilation type
Down, Up
Mounting type
Overbench cabinet, Bench Through
FX2-ESD/EX-D50-L1100-Up-Low
Mounting type
Surface Edge, Ceiling, Wall, On top of horizontal surface
FX2-ESD/EX-D50-L1100-Down-Low
Mounting type
Surface Edge, Floor, Wall, On top of horizontal surface
FX2-ESD/EX-D50-L1100-Down-Through
Mounting type
Bench Through
FX2-ESD/EX-D50-L1500-Up-Low
Mounting type
Surface Edge, Ceiling, Wall, On top of horizontal surface
FX2-ESD/EX-D50-L700-Up/Down-Low
Ventilation type
Down, Up
Mounting type
Surface Edge, Ceiling, Wall, On top of horizontal surface
FX2-ESD/EX-D50-L1500-Down-Low
Mounting type
Surface Edge, Floor, Wall, On top of horizontal surface
FX2-ESD/EX-D50-L1500-Down-Through
Mounting type
Bench Through
ArtNo: 70374600
Extensión FX-Cut2fit-L2200
|
ArtNo: 70376983
FX-Dome hood-ESD/EX-D50/75/100
|
ArtNo: 70377037
FX2-Duct connector-ESD/EX-D50
|
ArtNo: 70377042
Kit de soporte FX - D50/75/100-L500.
Kit de montaje completo, con el soporte clásico, perfil de extensión de 500 mm (19.68 pulgadas) y piezas asociadas, para montar brazos FX2 50/75/100 en el techo. Para rótula PLUS (dobles) y simples
|
ArtNo: 70377044
FX2-Wall BRKT kit-Flat-L190-Black
|
ArtNo: 70377045
Tapa de cubierta para techo FX-PLUS
|
ArtNo: 70377056
Ducto FX2-Al-L1000-D50 a D77. Ducto de aluminio con un diámetro de 77 mm (3 pulgadas) y una longitud de 1000 mm (39.37 pulgadas) diseñado para sustituir el ducto de ventilación vertical situado encima del pivote del brazo FX2 50. Es una alternativa atractiva al ducto de ventilación estándar
|
ArtNo: 70377057
FX2-Ducto de aluminio-L2000-D50 a D77. Conducto de aluminio con un diámetro de 77 mm (3 pulgadas) y una longitud de 2000 mm (78.74 pulgadas) diseñado para sustituir al ducto de ventilación vertical situado encima del brazo giratorio del FX2 50. Se trata de una alternativa atractiva al ducto de ventilación estándar
|
ArtNo: 70377067
Anillo de soporte FX2 para manguera-D75. Colóquelo en la manguera de 75 mm (3 pulgadas) para sujetar la conexión entre la manguera y el conector del ducto del brazo.
|
ArtNo: 70377101
FX-Hose-ESD-D75-L3000-Black
|
ArtNo: 70500244
FX-Combi hood-ESD/EX-D50/75/100
|
ArtNo: 70500544
FX-Metal hood-ESD/EX-D50/75/100
|
ArtNo: 70501144
Kit de soporte FX - D50/75/100-L190
|
ArtNo: 70501244
Soporte clásico FX-D50/75/100 (no apto para rótulas PLUS)
|
ArtNo: 70501344
Extensión FX-Cut2fit-L1100
|
ArtNo: 70501444
Kit de soporte para mesa FX2-D50/75/100
|
ArtNo: 70502644
Tapa de cubierta para techo FX
|
ArtNo: 70502944
FX-Flange hood-ESD/EX-D50/75/100
|