Nederman

MagnaRail

MagnaRail

Exhaust extraction system for emergency stations with highest operational requirements

MagnaRail is a high capacity system designed to handle highest operational requirements. Up to four vehicles can be attached to the same rail each with a designated disconnection point. For a drive through application for vehicles with either high level or low level tail pipes. The suction rail is formed in a configuration such that the extrusion serves not only as an exhaust duct, but also as the guide rail that the extraction trolley travels in. The rail is available in up to 30 m (98 ft). The fan/duct work can be connected to the rail via either a end outlet or top outlets (depending on length of rail).

Optional automatic start/stop device that offers:
-Practical control of fan start/stop
-Safe control of air quality (source ventilation automatically starts when vehicle engine starts)
-Simple programming
- Approval for radio equipment acc. to EC directives, FCC (USA) and IC (Canada)

  • High exit speed: up to 25 km/h - 15 mph
  • Exhaust pipes: low level or high level
  • Capacity: up to 4 vehicles at a time
  • For reverse-in or drive-through

Technical data
Certifications CE

Models16

Accessories for this product 27

Anchor plate shutter in two parts
ArtNo: 20371853

2 Piece Anchor plate shutter for MagnaRail

3 Piece Anchor plate shutter for MagnaRail and MagnaTrack
ArtNo: 20371868

3 Piece Anchor plate shutter for MagnaRail and MagnaTrack

Anchor plate for MagnaRail/MagnaRail Green/MagnaTrack ST Green
ArtNo: 20372003

Anchor plate for MagnaRail/MagnaRail Green/MagnaTrack ST Green

Transition 16 ga Galv for 920 Rail / MagnaRail - Diameter: 6.3 in (160 mm) to = 6 in (150 mm)
ArtNo: 20373760

Transition 16 ga Galv for 920 Rail / MagnaRail - Diameter: 6.3 in (160 mm) to = 6 in (150 mm)

Transformer 230/24 V / 15 VA for MagnaRail
ArtNo: 20374242

Transformer 230/24 V / 15 VA for MagnaRail

Top Mounted Round Exhaust Outlet for 920 and MagnaRails - Outlet Diameter = 8 in (200 mm)
ArtNo: 20374246

Top Mounted Round Exhaust Outlet for 920 and MagnaRails - Outlet Diameter = 8 in (200 mm)

Extension handle/shaft for Magna Systems - HL nozzle (17)
ArtNo: 20374359

Extension handle/shaft for Magna Systems - HL nozzle (17)

Twist support for Magna Systems - HL nozzle
ArtNo: 20374364

Twist support for Magna Systems - HL nozzle

Hose protection ø130/160 (Pair)
ArtNo: 20374428

Hose protection ø130/160 (Pair)

Transmitter vehicle GHz
ArtNo: 20376723

Transmitter vehicle GHz

Receiver GHz
ArtNo: 20376724

Receiver GHz

Handheld transmitter GHz
ArtNo: 20376725

Handheld transmitter GHz

MagnaSystem Nozzle Standard (10a)
ArtNo: 20802164

MagnaSystem Standard Nozzle Diameter = 6 in (160 mm) - Low Level (LL)

MagnaSystem Nozzle Ø160 (6") HB 600 Low Level (10a)
ArtNo: 20802264

MagnaSystem HB 600 Nozzle Diameter = 6 in (160 mm) - Low Level (LL) - Anchor plate to be mounted 23.6 in (600 mm) from Exhaust Pipe

MagnaSystem Nozzle Ø130 (5") HB 600 Low Level (10a)
ArtNo: 20802364

MagnaSystem HB 600 Nozzle Diameter = 5 in (125 mm) - Low Level (LL) - Anchor plate to be mounted 23.6 in (600 mm) from Exhaust Pipe

MagnaSystem Nozzle Ø160 (6") HB 900 Low Level (10a)
ArtNo: 20802464

MagnaSystem HB 900 Nozzle Diameter = 6 in (150 mm) - Low Level (LL) - Anchor plate to be mounted 35.4 in (900 mm) from Exhaust Pipe

HB600 High Temp Nozzle for low level (LL) Magna Systems - 6.25 in (160 mm) 23 in (600 mm) - 570 F(280 C)
ArtNo: 86900123

HB600 High Temp Nozzle for low level (LL) Magna Systems - 6.25 in (160 mm) 23 in (600 mm) - 570 F(280 C)

Oval Nozzle for Dual Ppipe Vehicle Exhaust - 6 in (160 mm)
ArtNo: 86900371

Oval Nozzle for Dual Ppipe Vehicle Exhaust - 6 in (160 mm)

HB900 High Temp Nozzle - 6 in (150 mm) for Magna Systems
ArtNo: 86900635

HB900 High Temp Nozzle - 6 in (150 mm) for Magna Systems

Lift-pole for MagnaRail and Attachments
ArtNo: 87000327

Lift-pole for MagnaRail and Attachments

Fan Motor Starter Auto Start Control Panel - 3 HP / 208-230 V / 1 PH / 60 Hz
ArtNo: 89116050

Fan Motor Starter Auto Start Control Panel - 3 HP / 208-230 V / 1 PH / 60 Hz

Fan Motor Starter Auto Start Control Panel - 3 HP / 208-230 V / 3 PH / 60 Hz
ArtNo: 89116051

Fan Motor Starter Auto Start Control Panel - 3 HP / 208-230 V / 3 PH / 60 Hz

5HP/1PH/208-230V Auto-Start Control Console
ArtNo: 89116052

Fan Motor Starter Auto Start Control Panel - 5 HP / 208-230 V / 1 PH / 60 Hz w/ASIbd

Receiver Gen II US
ArtNo: 89116065

Receiver Gen II US

Flex Nozzle ONLY - 6 in (150 mm) with 9 in (225 mm) opening 2007en
ArtNo: 89298061

Flex Nozzle ONLY - 6 in (150 mm) with 9 in (225 mm) opening 2007en

Flex Nozzle ONLY - 6 in (150 mm) with 8 in (200 mm) opening 2007en
ArtNo: 89298064

Flex Nozzle ONLY - 6 in (150 mm) with 8 in (200 mm) opening 2007en

Flex Nozzle ONLY - 6 in (150 mm) with 10 in (250 mm) opening 2007en
ArtNo: 89298065

Flex Nozzle ONLY - 6 in (150 mm) with 10 in (250 mm) opening 2007en