BenchTop Extraction Arm FX2 75 Original

Efficient, low-noise, and flexible extraction arms. FX2 original is a robust and reliable all-round arm for general use where there's minimal risk of electrical discharge or chemical exposure.

Nederman FX2 arms are made of lightweight anodized aluminium sections, with three adjustable, composite friction joints. Offering strength and durability combined with easy handling, they can be used in many types of environment. They are especially suitable for applications where small, flexible and easy-to-use arms are required.
A robust and reliable all-round arm for general applications where there is little risk of electrical discharges or attack by aggressive chemicals.

Efficiently optimises the capture zone and removes contaminants at the source
Low noise levels for a safe and quiet workspace
Various lengths and mounting options for flexibility
The lean, smooth and aesthetic design allows arms to fit in well in any environment without compromising its durability and reliability
Adapts to business needs for optimal workspace

Technical data
Certifications	CE
Noise level (dB(A))	58 dB(A) at 140 cfm
Installation	Indoor
Material	Tubes in anodizied aluminium. Joints in PP plastic. Duct connectors in EPDM rubber. Minihood in PP plastic.
Fume temperature	max 158 °F (70 °C)
Extraction arm diameter (in)	3 in. (75 mm)
Airflow (CFM)	65 - 150 cfm (110 - 240 m3/hr)
Category type	Original
Colour	Aluminum and white

Models8

FX2-ORIG-D75-L1100-Up-Low

ArtNo: 70602344

Arm length (ft)

3.6

Weight (lbs)

3,2

Ventilation type

Mounting type

Surface Edge, Ceiling, Wall, On top of horizontal surface

FX2-ORIG-D75-L1100-Up-PLUS

ArtNo: 70602444

Arm length (ft)

3.6

Weight (lbs)

4,5

Ventilation type

Mounting type

Ceiling, Wall

FX2-ORIG-D75-L1100-Down-Low

ArtNo: 70602544

Arm length (ft)

3.6

Weight (lbs)

3,2

Ventilation type

Down

Mounting type

Surface Edge, Floor, Wall, On top of horizontal surface

FX2-ORIG-D75-L1100-Down-Through

ArtNo: 70602644

Arm length (ft)

3.6

Weight (lbs)

2,6

Ventilation type

Down

Mounting type

Bench Through

FX2-ORIG-D75-L1500-Up-Low

ArtNo: 70602744

Arm length (ft)

4.9

Weight (lbs)

3,4

Ventilation type

Mounting type

Surface Edge, Ceiling, Wall, On top of horizontal surface

FX2-ORIG-D75-L1500-Up-PLUS

ArtNo: 70602844

Arm length (ft)

4.9

Weight (lbs)

4,7

Ventilation type

Mounting type

Ceiling, Wall

FX2-ORIG-D75-L1500-Down-Low

ArtNo: 70602944

Arm length (ft)

4.9

Weight (lbs)

3,4

Ventilation type

Down

Mounting type

Surface Edge, Floor, Wall, On top of horizontal surface

FX2-ORIG-D75-L1500-Down-Through

ArtNo: 70603044

Arm length (ft)

4.9

Weight (lbs)

2,8

Ventilation type

Down

Mounting type

Bench Through

FX-Cut2fit extension-L2200

ArtNo: 70374600

FX-Cut2fit Anodized Aluminum Tube Extension L = 2200 mm (87 in)

FX-Dome hood-ORIGINAL-D50/75/100

ArtNo: 70376982

FX-Dome Hood for ORIGINAL Arms D50/75/100 - Round Transparent PET-G plastic with integrated handles

FX2-Duct connector-ORIG/CHEM-D75

ArtNo: 70377038

FX2-Duct connector-ORIG/CHEM-D75.

FFX2-Bracket kit-D50/75/100-L500

ArtNo: 70377042

FX2-Bracket Kit - Ceiling Mount with 20 in (500 mm) extension for FX D50/75/100

FX2-Wall Bracket kit-Flat-L190-White

ArtNo: 70377043

FX2-Wall Bracket Kit - WHITE flush mount bracket with 7.5 in (190 mm) profile extension for D50/75/100

FX2-Ceiling cover plate-PLUS

ArtNo: 70377045

FX2-Ceiling Cover Plate-PLUS for D50/75/100 Arms - WHITE ABS Plastic - Cover ceiling opening caused by FX2 Tube (Cut D to Fit)

FX2-Wall-P Bracket kit-D50/75/100-L190

ArtNo: 70377046

FX2-Wall-P Bracket Kit for D50/75/100 Arms - Steel Bracket L = 7.9 in (190 mm) with 190 mm Aluminum Tube for tube supports

FX2-Al duct-L1000-D75/100toD100

ArtNo: 70377058

FX2-AL Duct for D75/100 Arms - D = 4 in (100 mm) L = 39 in (1 m) - Aluminum

FX2-Al duct-L2000-D75/100toD100

ArtNo: 70377059

FX2-AL Duct for D75/100 Arms - D = 4 in (100 mm) L = 79 in (2 m) - Aluminum

FX2-Hose support ring-D75

ArtNo: 70377067

FX2-Hose Support Ring-D75 - Placed inside the hose to support the clamp connection with FX duct connector

FX2-Hose support ring-D100

ArtNo: 70377068

FX2-Hose Support Ring-D100 - Placed inside the hose to support the clamp connection with FX duct connector

FX-Hose-D75-L3000-Grey

ArtNo: 70377098

FX-Hose-D75-L3000 - Flexible Gray PVC - D = 3 in (75 mm) L = 10 ft (3 m) - Includes Ring-D75 and (2) Hose Clamps

FX-Hose-D100-L3000-Grey

ArtNo: 70377099

FX-Hose-D100-L3000 - Flexible Gray PVC - D = 4 in (100 mm) L = 10 ft (3 m) - Includes Ring-D100 and (2) Hose Clamps

FX-Combi hood-ORIGINAL-D50/75/100

ArtNo: 70500144

FX-Combi Hood ORIGINAL arms 2-4 in (50-100) diameter - Transparant - PET-G - contaminants with low energy

FX-Metal hood-ORIG/CHEM-D50/75/100

ArtNo: 70500444

FX-Metal Hood ORIG/CHEM arms 2-4 in (50-100 mm) diameter - Powder coated White AL - High temperature - corrosion resistance

FX-Bracket kit-D50/75/100-L190

ArtNo: 70501144

FX-Bracket Kit for D50/75/100 Arms - Aluminum - Includes: Classic Bracket, Extension Tube and Hardware

FX-Classic bracket-D50/75/100

ArtNo: 70501244

FX-Classic Bracket for D50/75/100 Arms - Aluminum - Use with Cut2fit Extension - Note: without profile extension tube

FX-Cut2fit extension-L1100.

ArtNo: 70501344

FX-Cut2fit Extension-L1100 - Aluminum - L = 43 in (1100 mm) - Use with classic bracket for mounting D50/75/100 Arms

FX2-Bench bracket kit-D50/75/100

ArtNo: 70501444

FX2-Bench Bracket Kit-D50/75/100 - Steel - Note: Manually adjust Bench Bracket Arms to fit respective mounting hole width for D50/75/100 swivel (see mounting instructions)