600A EX

A Powerfull stationary dustcollector

A Powerfull stationary dustcollector, excellent high vacuum for suction over long horizontal and vertical distance.

You can choose a dustcollector with bigbagholder and counterweight discharge valve or a dustcollector with a manual discharge valve. Equipped with efficient and selfcleaning bag filters.

600A EX is category 2GD equipment according to directive 2014/34/EU. This means that it may be placed in areas classified as zone 21 or 1 according to directive 1999/92/EC. However, 600A EX may not be used to vacuum combustible material; they are only for use with non-combustible dusts. This is since they lack a protection system to limit the effects of an internal explosion, hince the X in ATEX marking.

ATEX approved euqipment: II 2GD c IIB 60°C (T6) X

  • A Powerfull stationary dustcollector, excellent high vacuum for suction over long horizontal and vertical distance. You can choose a dustcollector with bigbagholder and counterweight discharge valve or a dustcollector with a manual discharge valve. Equipped with efficient and selfcleaning bag filters. 600A EX is category 2GD equipment according to directive 2014/34/EU. This means that it may be placed in areas classified as zone 21 or 1 according to directive 1999/92/EC. However, 600A EX may not be used to vacuum combustible material; they are only for use with non-combustible dusts. This is since they lack a protection system to limit the effects of an internal explosion, hince the X in ATEX marking. ATEX approved euqipment: II 2GD c IIB 60°C (T6) X
  • Very powerful and reliable ejector as vacuum producer
  • Very powerful and reliable ejector as vacuum producer
  • Legs with two height options

Technical data
Certifications CE, EX
Installation Indoor
Filter cleaning method Compressed air
Application Dust, Granulate, Grit, Chip
Dustbin volume (gal) 146
Filter Area (ft²) 2,5
Filter type Bag
Filter material Antistatic Polyester
Compressed air requirement 5,3 Nm3/min
Max airflow (m³/h) 318
Noise level (dB(A)) 75
Max vacuum (in. wg) -78
Inlet (inch) 76 mm (reducer to ø 51 mm included)
Weight (lbs) 240
Hose length (m) 10
Hose diameter (mm) 51
Note ATEX - EX II 2 GD c IIB 60°C(T6) (Not for combustible dust)

Accessories for this product 9

Abr plate for silo S200, inside 210x643 (R280)
ArtNo: 43627001

Abr plate f/silo S200

Hose PU12 Ø 51 L=10m w. couplers
ArtNo: 43832200

PU12 Polyurethane Hose with embedded steel helix Diameter = 2 in (51 mm) Length = 33 ft (10 m) w. couplings

Floor nozzle, width 400 mm with large rubber wheels, Ø51
ArtNo: 43840250

Floor suction head with large 2.5 in (65 mm) rubber wheels - 16 in (400 mm) Wide for 2 in (51 mm) suction pipes or hose

Elbow pipe, Ø51 mm
ArtNo: 43842150

Suction pipe 50 degree elbow for 2 in (51 mm) suction pipe or hose - Antistatic

Gulper tool, metal, 2.0 in/51mm dia, 39.3 in/900mm long
ArtNo: 43850001

Straight Metal suction pipe w/ false air valve for 2 in (51 mm) suction pipe - Length 36 in (910 mm)

Scraper nozzle, length: 500 mm Ø51
ArtNo: 43851050

Scraper nozzle floor tool for 2 in (51 mm) suction pipe - Length = 20 in (500 mm)

Round rubber brush, soft bristles
ArtNo: 43860200

Suction tool, hand held with round black soft horsehair brush D = 2.5 in (60 mm) for 2 in (51 mm) vaccum pipe or hose

Plastic crevice nozzle, cone, confined spaces, 9 in/230mm, 1.0 in/25mm
ArtNo: 43862001

Suction tool, Hand held conical nozzle for 2 in (51 mm) vaccum pipe or hose - Length = 10 in (250 mm)

Reducer conical d76-51, Acid stainless steel
ArtNo: 43880300

SS Transition 16 ga Galv - A4 - conical - 3 in to 2 in (76 mm to 51 mm) Length = 8.3 in (210 mm)